The CTR 320 and 426 delimbers are designed for maximum productivity, reliability, and component life and help you get the job done quickly and efficiently. Choose the 320 with its three-knife design and 31-inch throat opening for small to medium softwoods and small hardwoods. Or step up to the 426 with its four-knife design and 34 3/8-inch throat opening for larger wood sizes and multiple stem thinning applications. Consider the features below and you'll agree, you can't find a stronger, better-built delimber than CTR.
Turntable Bearing Mounting Bolt Measurement | — |
Oregon® Brand 11H Roller Tip Saw Bar | — |
Turntable Bearing Diameter | — |
Turntable Bearing Mounting Bolt Measurement | — |
Oregon® Brand 11H Roller Tip Saw Bar | — |
Turntable Bearing Diameter | — |
Nose Roller Diameter | — |
Saw Chain Pitch | — |
Standard Flow Topping Saw Motor 208.2 to 340.7 Lpm (55 to 90 gpm) | Standard |
Mounting Base | H-D Rotating Cradle |
High Flow Topping Saw Motor 340.7 to 416.4 Lpm (90 to 110 gpm) | Optional |
Nose Roller Width | — |
Total Weight - Including Accumulator Box | — |
Frame Length | — |
Frame Height | — |
Saw Chain Drive Links | 66 |
Direct Saw Drive Sprocket, Case Hardened, 9 Teeth | — |
Alloy Steel Blades | — |
Number of Knives | 4 |
Frame Width | — |
Throat Opening | — |
Saw Chain | Oregon® Brand 11H |
Bar and Chain Oiler | Automatic |
Mounting Base Pin Dia. | — |
Turntable Bearing Mounting Bolts | Grade 8 |
Bar and Chain Oil Reservoir | — |
Auto Chain Tensioning System | Standard |
Low Flow Topping Saw Motor 151.4 to 208.2 Lpm (40 to 55 gpm) | Optional |
Data not available.